Tool support for the research of bio-physical characteristics of aquatic ecosystems, water quality, abrasion accumulation processes in the coastal zone and rivers, waste transformation and assessment of technogenic and anthropogenic impacts on aquatic ecosystems.
AUTONOMOUS
SPEED AND DIRECTION METER
SUBMERSIBLE
ITA
Autonomous measuring speed and direction of flow - the flow meter "ITA" is intended to implement, issledovaniyskorosti flow and its direction to a depth of 100 meters in environmental monitoring; study the transformation of sewage into the aquatic environment, direction and velocity of flow of sediments, and registration on the remote control board measured values.
Application
Environmental monitoring - Autonomous measuring speed and direction of flow is designed for rapid field measurements of flow rate in the study of transformation of the sewage in the coastal zone, rivers, reservoirs, water areas of ports, inlets and bays in environmental monitoring, investigation of dynamic processes in the cultivation of aquaculture.
Study of abrasion-accumulation processes - Rapid identification of abrasion coastal areas, riverbanks, speed and direction of flow of suspended sediment and its transformation. Identification of sites forming accumulation landforms. Localisation of litodinamic systems and sites bottom erosion.
Main advantages
Autonomous measuring speed and direction of flow of ITA is intended for work with the small size of any vessel, pier. Deployment time is less than 2 minutes.
Package includes:
1. Gek meter ITA submersible.
2.Autonomous power supply 13V, 2.1A.
3.Remote display and data storage.
4.Charger.
Specifications
This instrument is unique in its parameters and is unparalleled in its simplicity of application and accuracy of measurement, which is achieved by applying new principles and techniques. ITA flow meter is equipped with measuring channels of hydrostatic pressure, temperature (on request), which makes it universal in research.
Measuring the speed and direction of flow is an important parameter in assessing the dynamic processes in the aquatic environment. These processes not only cause the transport and transformation of pollutants entering with sewage in the coastal zone, but also cause the water circulation assessment is important when selecting sites cultivation aquaculture.
In monitoring the abrasion of coastal processes in rivers, coastal fully expresses the physical process, allowing rapid detection abrasion coastal areas; in the direction of flow - to assess the direction of flow of sediment
Measurement of flow velocity ITA has a flexible structure with the possibility of recording data on the PA-1 with subsequent recording of data on the PC. Nutrition probe is carried out from an autonomous power source ("APS"). Charging the battery APS conducted from the charger.
Office of the meter ITA, display, and the accumulation of information by using the remote PA-1, which is part of the set.
PA-1 has a non-volatile memory, which is retained after power is turned off all current information about the installed options, modes, and the results of the measurements.
Table of the main characteristics of the meter ITA
|
Measurement range: Azimuth, degrees The rate of flow, cm / sec Hydrostatic pressure, Mpa Temperature град.С |
0-360 3-300 0 - 10 -2 - 35 |
|
Error |
5% |
|
Unit price lowest level, not more: Azimuth, degrees The rate of flow, cm / sec Hydrostatic pressure, Mpa |
0.5 0,5 0.05 |
|
Operating temperature |
0 - 40° |
|
Depth |
unto 100 m |
|
Dimensions: |
length 25 cm, diameter 15 cm |
|
Weight |
not more than 1.2 kg |
|
* Power (battery included) |
autonomous, 13V, 2.1A / h |
|
Consumption |
not more than 0.4 W |
|
Indication and the accumulation of measurement results (Remote display included) |
digital (possibly pairing with other loggers) |
Name and symbol |
Quantity |
Meter ITA submersible |
1 pc. |
APS 13V, 2,1 A |
1 pc. |
STORAGE * |
1 pc. |
PA-1 |
1 pc. |
Communication cable remote with PC |
1.0m |
Cable Communications ** |
10m |
RE |
Compl. |
* STORAGE supplied on request.
** The cable length is established in consultation with the Customer.
* * * * *